What is the best way to use the glove side to increase shoulder and pitch speed?

Before I go into answering this question please understand that there is several critical mechanical components that occur before the glove side even comes into play during the pitching delivery. It is essential when learning velocity focused pitching mechanics that you master all of these critical components before front foot strike which is when the glove side takes action. You can learn all of these mechanical components in the 3X Pitching Velocity Program.

When the glove side is ready to serve its purpose, it must immediately spring into action and become an effective fulcrum for the shoulders to launch. This means it must tuck tightly under the glove arm and shoulder. The tuck should be enough for the chest to push forward while the glove arm bicep is fully contracted like when curling weight. Do not let the glove drop or the elbow to swing out towards the dugout. The elbow must stick into the obliques of the core. By tucking the glove side up and under the arm and keeping it tight with the chest pushing forward this will set a strong fulcrum for the shoulders to efficiently accelerate around. Remember the purpose of the tuck is to create a stable fulcrum or pivot, NOT to assist the throwing arm during the launch. Using the glove side to assist the throwing arm during the throw will cause instability in the pivot point, slowing down the speed of the shoulders and could also cause arm drag which can lead to elbow and shoulder injury.

The best way to learn the glove side is to watch the glove side of hard throwers in slow motion.

Arm Strength and Velocity

To answer the question, YES, more arm strength will increase velocity but it could prevent you from reaching your potential top velocity. The arm muscles that are responsible for generating arm velocity is the Pectoralis major, Subscapularis, Supraspinatus, Infraspinatus, Teres minor and Latissimus dorsi. Technically these are not arm muscles because they are more apart of the shoulder, but these muscles are responsible for moving the arm. This is one of the problems with using the phrase “arm strength” when talking about throwing velocity.

Conditioning these muscles to grow stronger and faster will increase velocity but it is a double edge sword. It would be like a sprinter strengthening his arm muscles to increase his running speed. This will help in the beginning but it will eventually have a counter effect. The counter effect is in the kinematics. When the upper body becomes the more dominate force, then it drives the rest of the kinetic chain. This would mean if the sprinters dominate force is coming from his swinging arms, then his legs will be conditioned to grow more passive. This would have a counter effect on increasing speed because the legs have more potential to generate speed than the arms. The reason for this is that the legs are pushing off of the ground and they have bigger muscle groups to do this more explosively. This applies to pitching because pitching is a similar explosive movement. The only difference in pitching is that the explosive movement of the body must then transfer into the velocity of the ball. If a pitcher focuses mainly on “arm strength,” he will see a bit of an improvement initially, but it will eventually start to work against him. This is because the kinematics, or pitching mechanics, are changing. The arm is becoming more of the dominate force and the legs are becoming more passive. Just like sprinting, the legs will have a bigger impact on building power and velocity.

The lesson here is that these arm muscles must grow stronger to increase velocity, but they also must not be the dominate force when generating velocity. The foundation of a velocity focused training program must be built around leg and core lifts. The upper body or arm lifts must be a part of the program, but not the main focus. The Fusion System in the Ace Pitcher handbook, which is apart of the 3X Pitching Velocity Program, is a perfect model of this approach.

Every single pitcher who starts the 3X Pitching Velocity Program has this issue. Their upper body is the dominate force in generating their velocity, which is limiting their potential. Once they reverse their kinematics their velocity begins to increase again. This reverse is training them to use the legs as the dominate force and the arms as an elastic reaction to that force. You will see these type of kinematics with pitchers like, Tim Lincecum, Aroldis Chapman, Flex Hernadez. This type of approach to pitching mechanics will not only increase velocity, but it will also help reduce injury to the arm. This is because the arm is now being used as an elastic tool instead of a flexed contractile force to reach your top velocity.

When body tissues are cooled, nerve cells in the chilled area initially force adjacent blood vessels to constrict, leading to a marked reduction in blood flow to that part of the body. However, if the temperature of the affected area continues to drop, nerve activity is depressed and the blood vessels begin to open up, flooding the injured tissues with blood, even though cold is still being applied. This flood-of-blood (Hunting effect) is the human body’s reflex reaction to thwart severe cold injury in a body part subjected to chilling stress.

Dr. Meeusen’s studies showed that icing initially stops the swelling and blood flow of the damaged blood vessels into the local muscle tissue but after a period of 10 minutes it can begin to have an opposite effect to the area. His documentation continues to state this damage continues on to another important system of healing.

Lymphatic Vessels: Prolonged ice application can cause lymphatic vessels (which ordinarily help carry excess tissue fluids back into the cardiovascular system) to increase in permeability. This causes large amounts of fluid to pour from the lymphatics “the wrong way” into the injured area, increasing local swelling and pressure, potentially contributing to greater pain. If icing goes on too long, the lymphatic vessels can actually be nearly obliterated, losing all of their fluid to surrounding tissues.

The lesson here is NOT that icing is bad. What we have learned is that icing is effective initially but begins to cause problems after about 10 minutes. Read the description below for the proper way to ice the arm after a game to help aid the healing process.

Ice the elbow or shoulder region for 10 minutes immediately after pitching (DO NOT PUT ICE ON ULNAR NEVER), remove the ice for about 30 minutes, and then reapply it for 10 additional minutes. Repeat this cycle of about two 10-minute icings per hour as often as desired, based on how many pitches thrown, during the first 24 to 48 hours after pitching.

I also recommend that you use a heavy bag of icing. A little bag of ice will not cool off the area enough. You can put a towel on your arm to prevent freezer burn but try to use a bag of ice that almost hurts it is so cold. I also recommend taking a cold shower instead of a warm or hot shower post game for the same healing benefits of icing.

The major misconception of pitching, that continues to ruin arms, is the belief that velocity comes mainly from the arm. Stop thinking with your arm! This will cause so many problems mechanically and physically your career will eventually come to a halt. You need to beat it into your head everyday that your legs and core throw the ball and the arm follows and guides the pitch. When starting your delivery on the mound your first step should NOT be lift leg so I can break my hands and get my arm moving fast. This is pitching with all your arm. This is only recruiting your arm to handle the workload of the pitch. You must learn to recruit from the major muscle groups in the legs and core, to handle the workload of the pitch. In return this will generate so much more velocity and save your arm from absorbing all of the stress.

Pitching from the bottom or ground up is visualizing your lift leg as a log you are about to role down the hill or mound. Pick it up, feel its weight, hold back your upper body and throw the log down the hill leading with your butt to the target. It is extremely important that you load your weight back while the front leg moves to the target. Notice the picture above of Gagne in this “Load” position. Notice his weight is back, his back leg is sitting and his lift leg is moving to the target. This is the essence of bottom up pitching. Now notice the young man in the picture to the right of Gagne. He is almost at the same moment in the delivery but he is in a different position. His weight is forward, his arm is up and his stride is short. The difference between the two pictures is, once Gagne’s foot lands he can then transfer all the weight that he is loading in the back leg into the pitch. The young man has no weight loaded and is forced to only whip his arm to generate any velocity. The young man is pitching from the top down and he will be one of Dr. Andrews next patience if he does not make the adjustment.

Another sign of pitching from the top down is driving your glove hand to the target. This will also throw your weight forward preventing the “Load.” If you are a pitcher who pitches from the top down then thank God you read this article. You know need to understand what you are doing to cause this and learn to pitch from the bottom up. If you can make this adjustment, you will not only save your career as a pitcher, but you will increase your velocity by about 10-15 mph. The problem is this adjustment isn’t easy! It will not happen over night or within the year. It is a long process of changing muscle memory that you developed when you were very young. This means you will need a coach or video analysis to make this adjustment. You will also need to understand how to finish your delivery from the “Load” position and most important you must work on this adjustment everyday.

Please do not let this article discourage you. You have been given a gift with this knowledge. Most pitchers in high school and even college do not understand this consciously or subconsciously. Therefore this will put you ahead of the game.

What makes a BAD pitching Coach?

Someone who has no experience in playing the position at the top levels of the game, or someone who has no certified education of how to coach the position.

How can a BAD pitching Coach effect a pitcher?

Pitching takes a tremendous amount of muscle coordination. The body must naturally understand how to build maximum momentum and torque, to deliver an above average fastball to a specific location. It is a pitching Coaches job to guide the pitcher to reaching his athletic potential. This takes an expert understanding of the position and the athlete. If the pitching Coach is far from an expert then the chances of him being a guide to the pitchers athletic potential, is very poor. This could be detrimental to a young pitchers career because promoting bad mechanics, due to the lack of experience or education, will decrease velocity and cause injury. It happened to Me.

What are the signs of a BAD pitching Coach?

1) No experience in the top levels of the game.

2) No certified education in the world of pitching and athletic training.

3) A poor understanding of Physics Driven Pitching Mechanics.

4) A poor understanding of the physiology and psychology of his pitchers.

5) Over throwing his staff of pitchers.

6) Discouraging his pitchers from using a strength and conditioning program.

7) Forcing his pitchers to throw more breaking balls than fastballs.

8 ) Using Long Distance running to build endurance in his pitchers.

9) Excessive amounts of long toss.

10) A poor warm-up and dynamic stretching routine.

11) Not educating his pitchers on proper athletic nutrition and rehabilitation.

12) Not educating his pitchers on the mental game.

13) Uses a lot of poor conventional wisdom to coach his pitchers.

What are the signs of POOR conventional wisdom of pitching mechanics?

These are old techniques of pitching, that have been proven throw science, to decrease velocity or cause injury.

This would be Coaching the pitcher to:

1) Take the ball out of the glove and reach it to the sky.

2) Get into the T position. Glove hand to target and ball to center field.

3) Pull the glove hand in hard to your body, while pulling the throwing arm down to throw.

4) Kick the back leg up high after release. He may even use a chair for the pitcher to kick his leg over, after release, to force this bad pitching mechanic.

5) Keep your landing leg bent at release. Do not let it straighten!

6) Pull your head down hard during pitch.

7) Wipe your arm.

8 ) Slam your chest into your landing leg.

9) Move your arm faster.

10) Drive your glove hand to the target.

How to PLEASE a BAD Pitching Coach?

I will be the first to tell you that this isn’t easy. Due to the high percentage of BAD pitching Coaches in all levels of the game, ever pitcher will deal with a BAD pitching Coach a few times to many in their career. The best way to deal with a BAD pitching Coach, without him having an effect on your career, is not to avoid him but to please him. Here is some TIPS that will help.

1) Do whatever he says when he is looking and then do what you think is best when he isn’t looking.

2) Study the game, the position, physics driven mechanics and strength and conditioning. Become your Coach.

3) Do not let him catch you educating the other pitchers. Especially if he is a HOT HEAD.

4) Do not screw around when he is around you.

5) Do not talk bad about him to other players.

This is the MOST IMPORTANT TIP:

6) You must IMPROVE.

The hardest thing that any pitcher or athlete must learn, is that it is a rare case for you to find a Coach that will propel your career to the top levels of the game. This is because, they are just as concerned about their job, as you are about your job. So if you want to make it as a professional one day, you are going to have to knock down a lot of doors. You will always find support but the only person that is going to help you get their is yourself. I will leave you with this quote from Nolan Ryan.

“Pitching in the big leagues is a dream. Preparing to pitch in the big leagues is a nightmare.”

I have written about this component in just about every article on pitch velocity. I will once again define this into more detail. I am doing this because of how important it is to master the pitching component of “Separation.”

The picture here of Felix Hernandez pretty much says it all. You can see the “Separation” from his hips to shoulders. It is like he is a towel being rung out to dry. Tim Lincecum calls this tightening his “Rubber Band.” The “Rubber Band” being his core. To understand core torque and its effectiveness, you must understand how torque is generated in a 90 MPH pitcher.

When throwing a pitch, we rely on the rotation of three pivots. The hip pivot, collar pivot and the shoulder pivot. If we remove torque in one of these pivots then the other two are forced to handle more torque to keep the same velocity, which leads to poor velocity and injury. The most common loss of torque in young pitchers is because of poor “Separation.” To understand why this happens, let’s take a look at each pivot.

The Hip pivot builds torque just when the front foot lands and the back leg “Triple Extends.” View animation. This is the first pivot to build torque and it is important to achieve full range of motion in this pivot. If the hip pivot does not open completely to the target when the front foot lands, then you are not building maximum torque. The most effective way to build torque is with momentum. Without momentum, the torque is created with only a rotational force. A good example would be the old saying, “Squish the bug.” This would be turning the hip pivot instead of using the driving force from the legs and the fall, to build the torque. Using momentum to build torque is much more effective for generating top velocity.

In between the hip pivot and the next pivot I will discuss, this is the moment “Separation” must occur. If  “Separation” of the hips and shoulders DO NOT occur then the pivots are moving together. This combines the pivots into one pivot and the pitcher losses the opportunity to build core torque. This is because, when “Separation” occurs, the hip pivot and the collar pivot stay separate. The core is now stuck in the middle and forced to tighten or stretch like a towel or rubber band. Once again notice the picture of Felix Hernandez above with hip to shoulder  “Separation.”

The next pivot in the chain of building maximum torque would be the Collar pivot. The collar pivot occurs after “Separation,” or “Scap Loading.” If the collarbone or shoulders would have traveled with the hips, then this pivot would have built zero torque. This is like removing the back two tires from a race car. This is so important to velocity and longevity that it is surprising how very few young pitchers know about its importance. If the collarbone or shoulders stay back, while the hips open to the target, then the spine or core builds torque. Every vertebra of the spine begins to tighten like a towel being rung out. This is just like those little model race cars you had as a kid. The ones that you press to the floor and role back slowly on its wheels to wind the engine. There is a little rubber band like engine within the car that is building torque and when you let it go, BAM, it takes off. This is the same concept behind the pitching component “Separation.” This is why this component is so effective in generating top velocity. Adding more torque here means adding less torque to the last pivot. Which is the Shoulder Pivot.

The shoulder pivot is the most common and most familiar pivot. It is the pivot of the shoulder joint. When the arm externally rotates backwards this is building torque. The reason this pivot is so familiar to the average pitcher is because it is the easiest to use. This is only because it is used all of the time. It opens bottles, doors, used with a screw driver and any other house hold tools. It is very important to a persons quality of life. The problem is the shoulder pivot or joint is designed with a very delicate and intricate system of muscles. This is because it is the only multidirectional joint in the body. The key to top velocity and a long career is preventing this pivot from handling most of the torque. This pivot should mainly be used to guide the pitch to the target.

To visually understand how to  build torque in all three pivots is a lot easier than actually performing the task. The reason is because we are dealing with three pivots. For each pivot to build torque and then to use that torque to generate velocity, takes as much timing as physical strength and coordination. Learning this timing can take an entire career. This is why it is important to continuously analyze your pitching mechaincs to make sure you are building maximum torque within the first two pivots and using that torque to generate top velocity in the 3rd and final pivot.

It is very important to remember the keystone to this entire system of pivots is “Separation.” Master this component and the rest will come naturally. Best of luck!

To start the analogy we have a car, a hill and a wall. The car is sitting on top of the hill and the wall is built at the bottom. The wall is high enough to just peak over the hood of the car. There is a passenger in the car not wearing a seat belt. To begin, the car starts down the hill at full throttle. The farther it travels, the more speed it gains. It reaches the end of the hill and slams into the wall at full speed. The wall does not break or move. At this point I would like you to really visualize this event. I am sure you have good enough knowledge about classic physics to know what is going to happen to the passenger. Yes, the passenger is propelled through the windshield and flies through the air and lands about 40 feet in front of the car. So, why did this happen? Yes I could throw a bunch of scientific jargon at you but it shouldn’t be this complicated. The passenger flies out of the vehicle after hitting the wall at full speed because it was the only part of the car that wasn’t secured to it. Energy must go somewhere, so when the wall stopped the car, all the momentum transferred to the passenger because it still had the potential to move.

How does this relate to pitching? Good question! The best way for you to understand this comparison is if I describe the correlation. Let’s start with the car. The frame of the car in the analogy of the car crash is the pitchers core. The hill is of course the pitching mound and the wall is when the pitchers front leg lands and stabilizes in his delivery. Now, the front leg is important in this analogy. It is playing the role of the wall. That is no easy role to fill because the wall, in this case, was able to stop the car dead in its tracks. So as the pitchers core travels down the hill, like the car, gains momentum, then the front leg lands and plays the role of the bionic wall. What happens now? Let’s continue to keep this simple. To understand what happens now we must label the last correlation of the car crash analogy. That being the passenger. What is playing the role of the passenger during the pitching delivery? I will tell you! The ball is the passenger. The ball is along for the ride like the passenger and it also is the only part of the ride that isn’t secured to the vehicle or in this case, the pitcher. So, if the front leg does its job of playing the wall, then the ball will be forced to receive all of the momentum generated; in return reaching its top velocity potential.

You may still be a little confused at this point, so to help you pull it all together I will go into more detail about the wall. Let’s bring back up the event of the car crash again. Let’s say the car speeds down the hill and hits the wall but the wall does not hold. It gives away but manages to slow the car some. What happens now to the passenger? The passenger does not fly through the windshield. This occurs because the wall didn’t completely stop the car. It was allowed to continue moving until all the enegry created from the inertia of the car dissipated. Therefore the pasenger was saved because he wasn’t forced to receive all of the momentum from the car. This will be the same case with the ball, if the wall or leg does not stablize completely. This will mean the pitchers front leg will continue to bend instead of hold and the body will not transfer all of the momentum to the ball. For the pitcher to reach his top velocity potential he must stabilize from the front leg all the way up to the chin. The arm and ball should be the only part of the body moving after the chest has extended as far out as it is capable of going. Watch the video above of Edison Volquez performing this almost perfectly. Also view the pic here of Chien-Ming Wang in complete stablization of his front side.

If you would like TopVelocity.net to analyze your pitching video, please follow the instructions below.

How to shoot your video?

Shoot two angles for your video. An angle from behind the pitcher and an angle from the throwing arm side of the pitcher. Make sure that the camera is not higher than the pitchers shoulders. Also make sure the camera is stationary.

Each angel should have two or three pitches of video.

How do you package and send your video?

Compress your video into a digital format. For example, DVD, Divx, AVI, MOV, WMV, MPG or any other common format. Burn the format to a CD or DVD. Visit the “Contact Us” page and request our mailing address to send the video too.

Video Analysis

At TopVelocity.net, once we receive your video, we will analyze your mechanics with advanced video software. This software will allow us to do a comparison of your delivery to a Professional Pitcher with a similar frame as yours. We will then use the software to generate overlays and slow motion clips to give you an extremely detailed analysis. We promise you will be impressed.

Once the video has been analyzed, we will post your analysis here on the forums. You can then watch your analysis.

Our video analysis is very popular with the pitchers we have worked with. It is a great tool because they can always go back and look at the video. We do recommend that you have a video analysis done at least every 2 months.

If you are interested and would like to send your video in today, your first analysis is FREE. Contact Us

I am writing about “Violence,” the way I would write about “Power” in the pitching delivery. I use the word “Violence” to make a point. Before I attempt to make the point let’s look at the definition.

Define Violence: Violence is the exertion of physical force so as to injure or abuse.

Now why would I want to use the word “Violence” to make a point about something as delicate as pitching? The same reason companies use the word “Maximum Strength” to describe something as delicate as medicine.  Jerry Sienfeld has some great comedy on this topic.

Some people aren’t satisfied with “extra”, they want “maximum”! “Gimme the maximum strength ! Give me the maximum allowable human dosage ! That’s the kind of pain I’m in!

Figure out what will kill me, and then back it off a little bit”.

Very funny stuff but their is some truth in this joke. This is what makes it a great joke. The truth is, “Figure out what will kill me, and then back it off a little bit”, this actually works in the medical field. This is why morphine is still used today.

So lets take this philosphy and use it with pitching or any sport specific event. As pitchers, let’s learn how to exert as much force to our body WITHOUT causing injury. Now, let’s be careful here because your one body is all you have. So you better educate yourself like a doctor would do in his career, before pushing your body to its limit. To educate yourself you need to use a website like this to learn everything you can about good mechanics and how to develop an athletic physique. Not until you have established an above average understanding of “Physic driven Mechanics,” and have developed optimal strength, should you push your body to the limit.  I am serious. If you push too hard, too soon, you could seriously damage yourself. I did!

The way “Violence” in your delivery will help you, is if you use it at the correct time. Science has shown, that the speed of rotation from hips to shoulders, is in direct correlation to the velocity of the pitch. This means if you have good “Separation” in your hips to shoulders at front foot strike, then adding more violence to the rotation of these two pivots will increase your velocity. This video of Edison Volquez illustrates this point.

You can see the “Violence” in his delivery. He is pushing his body to its limits to achieve his maximum velocity. The longevity of his career rides in his mechanics. Does he have good enough mecahnics to prevent his wear and tear from exceeding his recovery rate between pitching appearances.

This is the name of the game in Pro ball. You may not realize this at the level you are now, so this is why I am giving you this information. If you want to play pro ball one day you need to start learning as much as you can about your body. My advice to you is, you must first train your body to handle this stress before you subject it to this stress. Also, remember drugs will always tempt you because of their healing powers but in the long term your body will last longer if you learn to do it naturally.

http://www.wired.com/science/discoveries/news/2002/04/51691